Deregulation and Shipping Industries Essay Example for Free

Deregulation and Shipping Industries Essay Regulation in economy is a process characterized by control, monitoring and managing of rules, processes, operations and methods in order to obtain and yield more positive results and attain an environment that is more convenient to consumers and businessmen (Boyson). Deregulation, which is the opposite of regulation, when used in different aspects and sectors of business have affected directly and indirectly the various business industries and companies. For instance, transportation deregulation has greatly impacted the shipping industry here and around the world. Changes are brought depending on how shippers used the systems of transportation. Globalization is a phenomenon the no one can deny is happening now. Industries and businesses are experiencing wide range of growth as they reach out different regions around the globe, and just like other businesses shipping and carrying industries have their eyes keen towards globalization. Thus a company, for instance, does not solely need to attend to its New York-Chicago transportation affairs, they now must also consider the inbound flow and tracking of ships from Asia and the outbound flow from other continents such as South America and Africa (Boyson). For this reason, there now exists a growing complexity in the networks and channels of transportation systems. Furthermore a challenge to effectively manage and control the local goods combined with the imported products are also observed. The challenged that arises from the complexities of network transportation has then prompted authorities to regulate systems of transportations. The increasing number for international needs of inbound and outbound flow of logistics and shipments had yield to large number of trucks and carriers. Authorities then deemed that a regulation that would minimize the increasing number of truckers and carriers that would enter and leave the US harbor is necessary and significant. Shipment and freight industries have seen enormous change and face lifts through the years. From the late 1970’s advocates of deregulation have called for the removing of federal economic regulation (Brenner). According to them by exposing freight and shipping industries to exit and entry regulation, industries failed to perform to their utmost potential. They are not able to maximize their resources as rate on inbound and outbound flow of shipments are controlled. They call for a deregulation as they believed that industries can perform better with out these laws that hold and breathe down their neck. By lifting various regulations, competition industries can exists that eventually would leave to better service as they searched for different strategies and mediums that would satisfy their customers and followers. Attesting this claim was the significant growth experienced business growth in terms of volume by the shipment and trucking companies under the deregulated market, from 1982 up to 1997 (Brenner). With deregulation, rates in which the companies provide their services are also lowered. This event happens as more ships are made available to travel and with ease of entry restrictions. Companies do not have to require large fees as the risks of inability to dock or set sail is stricken off. Circuitous routes made the shipping vessels are also eliminated which provides ease and convenience to the industries. Furthermore, deregulation encourages freedom in pricing. As a result, lower rates are observed. Deregulation laws in transportation have impacted the shipping industries greatly. From the structure and functions in how companies delivered their services up to the vision they gladly want to fulfill. However, of all those encouraging results obtained from deregulation none could be more important to its affect to the flow of goods here and abroad. With the deregulation, sufficient supply of goods is stimulated locally and internationally which has major effect in international commerce. Work’s Cited Boyson, S. Managing Effective Third Party Logistics Relationships: What Does It Take? Journal of Business Logistics . 1999. Brenner, M. A. World Seatrade Service. New York, NY: McGraw-Hill Companies. 1999.

Introduction To Industrialised Building System Construction Essay

Introduction To Industrialised Building System Construction Essay In this chapter, the detail of explanation and relevant literature review of Industrialised Building System in Malaysia high rise project will be presented. Generally, the contents of this chapter are covered by definitions, classification, essential characteristic, critical success factors and barriers of the IBS implementation of the high rise buildings in our local construction industry. The IBS is not a common term in Malaysia Construction industry now. Until now, it still has no one common accepted or agreed definition of IBS by any researchers. However, there are few researchers define the IBS on the characteristics and definition with different way. IBS is often referred to as off-site construction of the literature (Pan et al. 2008), remote (Blismas, 2006) the production, industrialization and automation of construction (Warszawski 1999), the off-site manufacturing, prefabricated buildings, pre-assemblies building (Gibb Isack, 2003), the prefabricated building, prefabricated building, non-traditional architecture and modern method of construction (MMC) said by Kamar, 2009. The following is the definition of the IBS from different authors: Warszawski (1999) described the process of industrialization, investment in equipment, facilities and technology to maximize production, reduce labour resources, and improve the quality. These elements are interconnected and joint together to make or improve performances of the building. Rahman and Omar (2006) said that the IBS as a construction system by using prefabricated building systems. The manufacturing of the components are done with machines, templates, and other forms of machinery and equipment. Components manufactured off-site, once completed, will be delivered to the General Assembly and erection of the construction site. IBS is defined as an integrated manufacturing and construction process, carefully planned organization, and efficient management, preparation and control of resources, activities and results from the highly developed components (Lessing, et al., 2005). The most comprehensive definition of IBS was perhaps clarified by Junid (1986). He said that in the process of industrialization in the construction industry, including IBS, building component, vision, planning, fabrication, transportation and site erection. The system includes a combination of software and hardware components of the balance between. Software includes system design; this is a complex process, learning the end-user requirements, market analysis, development of standardized components, manufacturing and assembly layout and process of the establishment, allocation of resources and material, a definition of the concept of architect framework. The software element provides a prerequisite for creating an enabling environment for industrialization and expansion. Chung Kadir (2007) defined as a large-scale production of building components IBS both in the factory or on-site according to standard shapes and sizes and transportation to the construction site, re-arrange some standard form construction and specifications Construction Industry Development Board (2003) defined as a construction method in which components are produced in a controlled environment (or off) IBS, transportation, location and assembled into a minimal additional site works with the structure. The definition of Industrial building systems (IBS) is varies. It depends on the authors position and philosophy in the ontology and epistemology. Some authors may be defined as a process or technology IBS. Table 2.1 is to highlight the definition of IBS category. On the other hand, there is an ontological position, either as a method, idea, product, innovation, improvement, modernization and new methods of provision. This problem has been discussed in the construction industry, since the industrial revolution, to change the human way of life and economic activity. Since the concept of quality improvement and in industry, invention and innovation, has become an important industry to deal with. This production and services, as the construction industry continues to progress and development, the latest and modern instrument factors. Then, every industry stakeholder can define with themselves on their practices and methods. Table 2.2 shows, only the author describes the process of defin ing a list of IBS and technology. Table 2.1: The Ontology of Building system (Sources: Adopted from Abdullah, 2009) Authors Characteristics Factory Base(Off-site) Production Techniques Mass Production Site Erection and Preassemblies Modular Component Elements Standardisation Labour Reduction Modem Method Automation Manufacturing Parid, W., 1997 X Trikha, D.N., 1999 X X X X Gibb, A,. 1999 X X X Warszawski, 1999 X X X X Ingemar, L. and Gylltoft.K 2000 X X X Kadir, M.R.A., et al., 2005 X X X X Marsono, A.K. et al,. 2006 X X X Table 2.2: The Characteristics of Building system (Sources: Adopted from Abdullah, 2009) Bil Authors Process Techniques 1 Dietz (1971) X 2 Dickerman (1973) X 3 Junid (1986) X 4 Parid (1997) X 5 Esa Nurrudin (1998) X 6 Badir Razali (1998) X 7 Trikha (1999) X 8 Warszawski (1999) X 9 CIDB Malaysia (1999) X 10 CIDB Malaysia (2003) X 11 Lessing (2005) X 12 Marsono. (2006) X 13 Rahman Omar (2006) X 14 MD Rahim (2006) X 15 Chung L.P. (2006) X 16 Henry M.A. (2006) X 17 (CIB) TG57 X 18 (CIB W24) X 2.2 Classification of IBS MMC is a long-term off-site infrastructure as technology and technological innovation of the collective description of the scene. The latter includes techniques such as thin-joint block work and tunnel in the form of construction (Goodier and Gibb, 2006). MMC also includes the floor or roof cassettes, pre-cast concrete foundation components, pre-formed wiring looms, mechanical engineering composite materials and modern construction methods. They can also include such as a tunnel or in combination with thin pieces of work (NAO, 2005; Gibb and Pendlebury, 2006) innovation (which is the essential characteristic). As the above quote, IBS is a component in which manufacturing, positioning and assembled into a structure with minimal extra site works off and on-site (CIDB, à ¢Ã¢â€š ¬Ã¢â‚¬ ¹Ãƒ ¢Ã¢â€š ¬Ã¢â‚¬ ¹2003; Chung, 2006). Although outside the technology will be discussed below, on-site prefabricated IBS can be used in place of steel formwork system (CIDB, à ¢Ã¢â€š ¬Ã¢â‚¬ ¹Ãƒ ¢Ã¢â€š ¬ †¹2003) in the form. Production and construction site prior to installation, they found a remote location off-site construction of the assembly or part of the description of the spectrum. All off-site may be a general decline in IBS and MMC title, not all of the IBS and MMC can be considered as off-site (Gibb and Pendleton, 2006). Off-site construction (OSC), off-site manufacturing (OSM) and off-site production (OSP) is basically interchangeable terms refers to the construction process, to carry out the construction site, such as in factories, away from the part of or sometimes in a specially established near the construction site (or field factories) (Goodier and Gibb, 2006) of temporary production facilities. Pre-fabrication is usually in a dedicated facility where a variety of materials joined to form the final part of the installation components (Tatum et al, 1986). While, the components maybe assemble on and offsite, Pre-assembly carried on a definition as in which a variety of materials, prefabricated components and equipment to join up as a sub-unit of the installation process in a remote location. It is generally concentrated in the system (ibid). Therefore, a general classification of IBS-MMC term is promoted in this paper based on the following hypothesis compiled by the previous researchers. Figure 2.1 below is show that a generic classification of IBS in MMC. Modern Method of Construction (MMC) Industrialised Building System Non Industrialised System Off-site Manufacturing (OSM), Prefabrication, Offsite Fabrication (OSF), Offsite Production (OSP) On-Site Fabrication Pre-assembly at Factory Assembly on site Figure 2.1: A generic classification of IBS in MMC (Sources: adopted from Kamarul Anuar Mohd Kamar, 2009) As defined, IBS-MMC has a various classifications, materials, processes and systems basis. Table 2.3 describes the classification of IBS, system construction, MMC and OSMs. It compares the different views and classification terms. Table 2.3: Comparison of IBS-MMC Classification (Sources: Adopted from Kamarul Anuar Mohd Kamar, 2009) Industrialised system classification (Badir et. Al 1998) Majzub (1977) system classification MMC classification (Gibb Pendlebury, 2006). Ross and Richards on (2005) and (NOA, 2005) Gibb Issac (2003) pre-assembly and pre-fabrication classification Abosad et. Al (2009) classification on OSM IBS Classification (CIDB, 2003) -Conventional building system -Cast in situ formwork system table or tunnel formwork -Prefabricated system -Composite system -Panel System -Box System -Frame System -Volumetric -Panelised -Hybrid -Subassemblies and components -Non-off-sites-Modem Methods of Construction -Component manufacture and sub-assembly -Non-volumetric sub-assembly -Volumetric pre-assembly -Modular Housing -Volumetric System -Panelised System -Hybrid System -Sub-assemblies and component system -Modular system -Pre-cast concrete-framed building -Pre-cast concrete wall system -Reinforced concrete Building with Pre-cast concrete slab -Steel Formwork System -Steel-framed building and Roof Trusses Majzub (1977) described the construction of classification should be based on the proposed use of components in Table 2.4 the relative weights. Weight factors have a significant impact on the portability of components, but also on the production of components and field methods of installation method. By weight category, there are components used in the production of basic material itself to determine the characteristics of the system being studied to distinguish between the advantages. However, Majzub classification is found to have inadequate construction of the recently incorporated into other systems to flourish. One striking example is the interlocking load-bearing blocks; this is a group of researchers at the University Putra Malaysia brainchild. This new system construction cannot be according to the framework, panels, and even box system. On the other hand, complex system that combines two or more of the construction methods cannot be classified under the classification of Maj zub. Therefore, the classification needs to be updated to imitate current technological progress. Table 2.4: Building system classification according to relative weight of component (Source: Adopted from Majzub, 1977) No General System System Production Material 1 Frame system Light weight frame Wood, light gage metals Medium light weight frame Metal, reinforced plastics, laminated wood Heavy weight frame Heavy steel, concrete 2 Panel system Light and medium weight panel Wood frame, metal frame, and composite materials Heavy weight panel (factory produced) Concrete Heavy weight panel (tilt up- produced on site) Concrete 3 Box system (module) Medium weight box (mobile) Wood frame, light gage metal, composite Medium weight box (sectional) Wood frame, light gage metal, composite Heavy weight box (factory produced) Concrete Heavy weight box (tunnel produced on site) Concrete C:UsersAndyNGAppDataLocalMicrosoftWindowsTemporary Internet FilesContent.WordNew Picture (2).png Figure 2.2 Type of Building System in Malaysia (Source: Adopted from Thanoon et al, 2003) In general, there are currently four types of building systems in Malaysia, Razali building system classification according to Badir et al. 1998, there are traditional, cast in situ, precast composite building system is shown in Figure 2.2. Each building system is on behalf of their construction method, which is further through its construction technology, features and geometry features. It is reported that there are at least 22 companies in Malaysia to provide institution building (Badir et al, 2002). From the point of  structural classification,  IBS  can be categorized  into five  major  groups, which are: prefabricated  timber  frame system Components  under  this group are  the columns, beams, floor slabs, prefabricated  roof  truss  system and similar as  made à ¢Ã¢â€š ¬Ã¢â‚¬ ¹Ãƒ ¢Ã¢â€š ¬Ã¢â‚¬ ¹from wood. Formwork system Mould for  concrete  component  moulds to  cast  there  as pillars, beams,  floor slabs  and wall panels  that can be used  repeatedly. These  moulds  are usually made  of plastic, fibreglass,  steel, aluminium  and  other  metal materials. Steel frame system Components  of this category are column, beam, portal frame and  roof  truss systems are made à ¢Ã¢â€š ¬Ã¢â‚¬ ¹Ãƒ ¢Ã¢â€š ¬Ã¢â‚¬ ¹of  steel. framing systems,  panel  and pre-cast  concrete  box Components  of this category are column, beam, portal frame and  pre-cast wall panels. It also including in three-dimensional pre-fabricated  components  such as  stairs, balusters  and toilets. System block This system refers to the use of concrete block (precision block works), including lightweight concrete blocks; the blocks are locked (interlocking block) and so on. It is hoping that IBS classification can be standardized in order for IBS-MMC to be acknowledged by practitioners as a primer construction method. 2.3 Essential Characteristics of IBS This is a reasonable review of the conditions, they emphasized that the successful implementation of industrialized building systems. Each of them briefly discussed below. 2.3.1 Modular Coordination Modular coordination or MC is a dimensional system. Coordination of a modular space size  harmonized system, parts,  accessories, etc.,  so that all  elements  fit  not to cut  or extend the  components and  accessories,  even  from different vendors (Trikha, 1999) made together. It is a concept of dimension and space, including construction and components on the basis of their name is called 1M, equal to 100 mm in the basic module units or coordination. The use of MC in IBS is effective application of the important factors, because it completed the industry through quality control and productivity answered by a staff of CIDB. The objectives of the modular coordination are: Create a variety of types and sizes of building components, can minimize foundation. Through the rationalization of the construction method, each component of the design and other similar exchange, therefore, designers freedom and choice provides the greatest degree. This can take a relatively large basic unit of measurement (basic module) and by limiting the dimensions of building components to recommended preferred sizes said by Warszawski (1999). Allow easy by any prefabricated buildings layout and exchange capacity. This is to achieve a common, rather than references to other components (Warszawski 1999) definition of modular grid construction and placement of each component. To reduce waste in the production of the installation process, by increasing productivity, to improve the quality of the construction industry and to encourage an open system. With open systems approach, building components can be combined in a variety of individual projects, while ensuring that their design architects of freedom. Modular building component of the length of the coordinated application of the basic units or M = 100cm module. This allows designers to apply this size or in the production of building components, its multiple. While the concept seems easy to pass, its application in the manufacturing process involves a large degree of harmonization and alignment and component interfaces (Kamar et al. 2009). 2.3.2 Closed system A closed system can be divided into two categories, namely design and production according to customer design and production based on pre-casters. The first category is designed to meet customer space requirements, that is, the specific building design and construction of various features of the space required. In this case, the customer needs is critical, pre-caster always forced to a specific part of the building. On the other hand, the fabrication on the basis of pre-casters design, including design and production of a single building type or alternative of a group of buildings, can generate common component assortments of. Such building includes school, parking garage, gas station, low cost housing, etc. Nevertheless these types of building arrangement can be justified economically only when the following circumstances are observed (Warszawski, 1999): Commitment because of specific design and project large enough to allow for the additional cost of each component in design and production costs of distribution. Openerved a large number of architectural design elements of repetition and standardization. In this regard, a new kind of prefabricated systems can automated the design and production process to overcome a number of standardized elements of the requirements. There is sufficient demand, is a typical types such as school construction, so that mass production can be. There is a pre-caster intensive marketing strategy to inspire customers and designers in the economic and non-economic aspects of long-term potential benefits of the system. 2.3.3 Open system In closed system the limitations inherent to an open system, which allows greater design flexibility to maximize coordination with designers and pre-caster have been proposed. The system is feasible, because it allows pre-caster products in a predetermined range and architectural aesthetic value while maintaining a limited number of elements. Kamarul Anuar Mohamad Kamar (2009) defined that open system concept is encouraged by the irritable bowel syndrome, to ensure that the architects in their design freedom. Open systems approach building components, a variety of individual projects can be combined in different products and technologies as part of interchange ability. A partition between the structure and the filling system may give different solutions, customized and pre-level standards. Separation according to building components, could lead to new forms of organization of production, use of standardized elements. Open System was first promoted during the rebuilding years of post-war Netherlands. Size, location and components of the interface rules of the open system is an important part. Kamarul Anuar Mohamad Kamar (2009) defined open system with the following characteristics: Open system is an innovative design and construction. It allows interchange ability of various components and subsystems manufacturers and suppliers. An open architecture components together the advantages of market needs, a variety of geometric and functional building types. It will encourage participation in manufacturing and assembly to enter the market, thereby reducing the price of IBS components. It advocates a modular concept and the separation of different levels of decision-making. Use standard welding system to resolve two or more systems in a building. It allows customers to participate in the design. Customers can choose to use the components provided by the developer of any building components directory. Open system will encourage pre-assembled by a higher level of industrialization and automation. 2.3.4 Standardisation and Tolerances To achieve the requirements of modular coordination, all components need to be standardized production. This standardization of the elements of space and the need to provide at various stages of construction, such as manufacturing tolerances, the tolerances and erection tolerances, so that combined statistical considerations on acquired tolerance to the extent permitted (Trikha, 1999). If the output is standardised, then the production resources can be used in most efficient manner. Then the production process, machinery and training of workers, can best absorb the specific characteristics of the product. 2.3.5 Specialisation Large precast production and standardization of production process, the height of the division of labour. This process can be subdivided into a lot of small standardized tasks. In such working conditions, workers exposures to their work repetitiously have a high level of productivity (Warszawski, 1999). 2.3.6 Production facility The initial capital investment to establish a permanent factor is the relative experience. Plant, equipment, skilled workers, management of resources needed to produce pre-acquisition can begin. Such a huge investment can only break even, if there is sufficient demand for the product. On the other hand, the establishment of a temporary casting yard or plant in the project site to minimize transportation costs (Peng, 1986). 2.3.7 Transportation It is found that the casting slab system can reduce the cost of labour up to 30%. However, these cost savings partially offset by transportation costs. Traffic has also been a large board in the countrys road sector requirements. When adopting prefabrication system, those limitations must be taken into consideration (Peng, 1986). 2.4 Barriers of implementation of IBS in Malaysia Clearly, the benefits offered by IBS are immense and plausible. It has been six years since the launching of the IBS Roadmap 2003 and is about the end of the mission of industrialising construction. The construction industrys stakeholders are little bit sceptical on using IBS product. It is pertinent to examine the progress and how close to the completion of the mission to date. More importantly, it is imperative to evaluate whether the implementation of the roadmap has met the market response to the IBS programme so far. Most policy issues have been resolved and implemented, while all relevant documents required to support the programme have been developed. In particular activities under the charge of CIDB are all meeting their datelines. Notwithstanding these achievements a number of implementation snags were identified as being potential hurdles to the implementation of the roadmap. Warszawski (1999) pointed out some of the barriers in implementing industrialisation in construction industry. There are decline in demand and volatile of building market make an investment in IBS more risky compared to conventional labour intensive method. Prefabrication elements are considered inflexible with respect to changes with may required over its life span. At university level student are less exposed to technology, organization and design of industrialised building system. An adaptation of standardization requires a tremendous education and training effort. Standardization of building elements face resistance from construction industry due to aesthetics reservation and economic reasons (Kampempool et al, 1986). Trikha (1999) cited the hindrance to the use of IBS due to lack of assessment criteria set by the approving authorities to urge the developers to use IBS. Poor response from the construction players to modular coordination despite heavy promotions and incentives from the government is also a hindrance to the successive implementation of IBS in Malaysia. As a result, partial introduction of IBS such as lintels and staircase has not been successful compare to the traditional cast in situ design. Kamar et al. (2009) said that a clear need for the construction industry in Malaysia IBS is a huge and credible strongly encourage the government and the system implementation plan. In fact, most of the contractors are not prepared to bid for IBS construction tender. Thanoon et. al. (2003) also highlighted cheap labour cost is the main barriers to the expedition of IBS. There are wide swing in house demands, whereas mainly caused by the high interest rate and low performance in economical factor. He also pointed out lack of skilled construction workforce which severe the situation. The nature characteristics of construction project which are fragmented, diverse and involve many parties. There lack of local RD and novel building system that use local material, which makes IBS often relies to imported technology from other countries. There are also insufficient incentive and promotion from the government to use IBS. The main reasons for the low adoption of IBS in Malaysia as stated in Construction Industry Master Plan (CIMP 2006-2015) are lack of integration in design stage and poor knowledge. IBS manufacturers are currently involved only after design stage. This lack of integration among relevant players in design stage has resultant in need for plan redesign and additional cost to be incurred if IBS is adopted. Client and approving authorities have poor knowledge of IBS compared to architects and engineers. Familiarity with IBS concept and its benefits is vital to its success because IBS requires different approach in construction. Despite this advances, some of the barriers were identified as potential barriers are being implemented: 2.4.1 Awareness and Knowledge According to the IBS Roadmap Review Report (2007), in Malaysia IBS is through a client-driven. Benefit of IBS has a good knowledge and awareness of the customer is bound to encourage the appointment of architect to design building to the IBS. However, the lack of awareness programs, to understand customer needs, and give correct information on IBS lack of interest from clients and policymakers (Rahman and Omar, 2006). Therefore, IBS is often misunderstood as high-risk process, rather than any interests of the owner of the building to contribute the lack of knowledge between the designer project lead to take the extra time delay to produce the details of the drawing. Client IBS roadmap (2007) based on client review, by Malaysia IBS is no longer such as customer-oriented Jusco, Tesco and other customers have insisted fast track construction. In housing development, with good knowledge and awareness of IBS clients will thus benefit from the appointment of designers to encourage the construction of IBS. However, the lack of awareness programs, leading to misunderstanding led to a lack of interest from clients and decision makers (Rahman and Omar, 2006). IBS is from the clients point of view, unless it is necessary to fast track projects, such as Tesco, Jusco projects, often misinterpreted as high-risk and expensive solutions. Local Authority Lack of knowledge among the approving authority, IBS, and the relationship between the current building codes misunderstanding and misinterpretation. Familiar with IBS will speed up the design approval, to ensure the success of IBS projects (construction of the master plan, 2007) is essential. But most of local authorities do not know the design of IBS often need more time than usual to deal with design approval. Policy Makers Chung and Kadir (2007) observed that most local authorities in Malaysia is unlikely to change local building regulations, to meet the adjustment, will consume a lot of time and cost of IBS. IBSs mid-term review (2007) stated that through a unified architecture from low amendment (MC) of modular coordination of law enforcement (UBBL) has not been implemented due to lack of knowledge and decision-makers between the concept of understanding. Workers Government hopes the IBS will help reduce dependence on foreign workers, 30% by 2015. But most people in the industry do not think IBS will greatly decrease the number of workers in the industry. IBS is a plant from the job site environment, environmental issues, said: A senior industry source said. 2.4.2 Planning and Implementation At presents, the pre-casters and contracting companies in Malaysia involved in the construction bidding phase the value chain. However, the observation of the design of IBS, and plans need to be addressed in the form at the design stage, to be successful through the slot before casting machine, designers and contractors (IBS roadmap review, 2007) integration. As a result, many projects in Malaysia IBS are not cost-effective, because it is intended to replace the traditional methods of design. IBS application has been included in the design stage. Changes in design, requires a lot of further adjustment, the rise of the initial time and cost. In addition, IBS demands a more coherent process, from initial planning and control structure, the end of the project, in order to achieve the target, and decrease defects and errors (Gibb, 2001 and Warszawski 1999). The overall project should be considered in such way that as soon as the components are manufactured, it is probable to bring it to the construction site and assemble it. Any delay, either in workshop or construction site has been phased requirements and production plans, from the part of several construction projects, as scheduled at the same time a serious impact on production. Although you can create any type of pre-architectural design, but if the possibility of production and construction, taking into account at the design stage itself can solve several problems related to manufacturing, transportation, and assembly of complex interfaces (Pan et al. 2008 and Hamid et al. 2008). The most common problems usually involve beams, columns and column bases in connection with the improper assembly of the components. These problems arise due to the fact that the parties involved in the construction of a main underestimating the accuracy of the base line and levelling. Basically, the precise formation and alignment of the two bases is the most important aspects of the rapid success of precast concrete erection (Rahman and Omar, 2006). 2.4.3 Costs Kamar et al. (2009) mentioned that many small contractors are unwilling to use the IBS system, and want to continue using traditional construction methods. This is due to the fact that small contractors are already common with the technology and suitable for small scale projects, so do not want to switch t

Criminal Profiling: Peter Sutcliffe

Criminal Profiling: Peter Sutcliffe Criminal Profiling: Peter Sutcliff One other aspect we can all discuss which is relatively new, is the work of psychologists in helping the police in catching a killer, it is known as criminal profiling or offender profiling, which can be traced back to 1888 when ‘Thomas Bond gave a detailed description on Jack the Ripper’ (Cross) it was later used by the FBI in America. Following the case of The Yorkshire Ripper it began to be used in Britain by the police force in other cases of catching other criminals and serial killers. The Yorkshire Rippers profile could have looked similar to the points below; 1, Has local knowledge of where the crimes are committed 2, Lives within the vicinities of the crime scenes 3, is likely to be somewhat of a loner 4, Could be married or living alone 5, if married, may spend time away from home on a regular basis 6, is disorganised 7, Sadistic 8, Religious 9, has a grudge against prostitutes 10, Is probably in a job, but of no skill Discuss the various theories of crime in relation to your chosen criminal In order to complete this discussion the chosen criminal shall be Peter William Sutcliff aka The Yorkshire Ripper, who during the time span of July 1975 and January 1981, claimed the lives of thirteen women, and attacked seven more. Most of Sutcliff’s victims were prostitutes and he committed the crimes within the vicinities of Leeds and the North of England. He used a variety of methods to kill and attack his victims, and an array of weapons. The methods used to kill and attack his victims included stabbing, strangulation, and bashing and the weapons he used consisted of an array of knives, a hammer, a hacksaw and a Ball-pein hammer, which later became his signature. Peter William Sutcliff was the first born of six children to Kathleen a quiet and solid catholic woman and John a man whom had an appetite for life ‘Murder case book vol 1’. It was his mother Kathleen that provided stability and security and gave him round the clock care following his birth due to the fact he was a small and weak baby. Peter grew up to be fond of his mother, more so than his father and it is reported that ‘he would hide behind her skirt on many occasion (murder case book vol 1). During his school years Peter was bullied by other children and would regularly play truant, his grades were of a poor standard and he left school at the age of fifteen without qualifications, he embarked on a variety of jobs, all of which he was unable to hold down due to the constant lateness of his arrival at work, one job which Peter had, and had held for three years was a post as a grave digger at Bingley Cemetery, during his early adult life he was regarded as being somewhat of a loner, deep and introvert ( murder case book vol 1) and would be the subject of ridicule by his family. Peter took an interest in body building at this time and would spend hours alone training, at this time he also met his future wife Sonia in a local pub when he was with his work colleagues, they had a relationship which lasted for eight years before finally In 1974. In 1969 John, Peter’s father discovered that Kathleen his wife was having an affair with a local policeman and he arranged for the whole family to confront her about it, Peter was devastated; it was later that year that he carried out an attack on a prostitute in Bradford following a row with her about a  £10 note. He hit her on the head with a stone in a sock while out in the red light district, of which he was a frequent visitor t. In 1971 Sonia his then girlfriend had a mental breakdown and at this time she reported to her psychiatrist that she had â€Å"heard the voice of God† Wicked beyond belief, she was diagnosed as suffering from schizophrenia, following her recovery she and Peter went on to marry in 1974, in less than a year of marriage Peter had carried out an attack on a woman, only to attack other women a short time later, and in October of 1975 claimed the life of his victim, a person identified as Wilma McCann aged twenty-eight, in Leeds, she be came the first in the long reign of terror that Peter William Sutcliff held. In order to discuss the various theories of crime that could account for Sutcliff’s behaviour one will examine the various theories which have evolved over the the past twelve decades beginning with the works of Cesare Comboso 1876, he was an Italian biologist who had an interest in crime (class notes) he reported that following this study , of similar facial features in criminals such as cold-glassy blood shot eyes, thick curly hair, strong jaws, long ears and thin lips, Lombrosos findings had no scientific evidence in support of his theories, he used correlation to identify his subjects in his study therefore we must dismiss this as being inconclusive, another theory of crime was also put forward using the same basis as Lombrosos by William Sheldon in 1949, who identified three body types, endomorphic, mesomorphic and ectromorphic, his study was based on 400 men in rehabilitation, the majority were found to be of a mesomorphic type, muscular, tough and strong. From both of t hese theories we are able to reflect the appearance of Sutcliff with cold glassy eyes and thick curly hair. Sutcliff also had a mesomorphic body shape; therefore we must keep an open mind of these particular theories. Possible explanation of the two studies could be chromosomes, some men in prisons have been found to have an extra Y in making them XYY but according to Jacob’s (class notes) it could be associated with them being more aggressive. There has been no scientific evidence to prove that there is a criminal gene but that is not to say that one does not exists. Another theory put forward in order to explain crime was (Eysneck Eysneck 1970) ‘the criminal is a neurotic extrovert (someone who scores high on both N E) N is linked to crime through anxiety, the high E score is stimulus-hungry, engaging in thrill enhancing behaviour and is more difficult to . The EPL questionnaires Eysneck Eysneck used also found that high P scorers also were established as being aggressive, uncaring, troublesome, inhumane, insensitive to others needs and feelings, tend not to experience guilt, prefer strange and unusual things and appear foolhardy! Although we have no knowledge of a questionnaire being completed by Sutcliff, one could give incidents that have occurred and situations that have taken place to reflect yet again with this theory. In September 1969 Sutcliff was arrested and charged with going equipped for theft ‘with a hammer’, while working in the cemetery he was reported by a work mate to have a macabre sense of humour, ‘he would lie down on a slab pretending to be a corpse with a shroud over him and make groaning noises’ (Murder case book ) also he would boast to workmate that he had stolen various items of jewellery from corpses ( wicked beyond belief) also following the job he was given at TWH Clark as a lorry driver, he posed for a publicity poster and wrote his own strange epitaph to accompany it, it read â€Å"In this truck is a man whose if unleashed would rock the nation, whose dynamic energy would overpower those around him. Better let him sleep? (Wicked beyond belief), and finally the crimes he committed such as stabbing a victim with a screw driver in her vagina and then going home to his wife as if nothing had ever happened. Another explanation to describe Sutcliff’s behaviour is frauds tripartite derision of the personality, the most primitive part which consists of basic biological impulses or drives, the source of psychic energy or libido which operates on the pleasure principle, // and to avoid pain regardless of external circumstances it is known as the ID, followed by the ego which is the rational part or controlling self it operates on the reality principle, holding back the impulses of the ID until they can be satisfied in society in socially approved was, and finally the superego which represents the of the values and morals of society, it is the conscience that controls the expression of the ID’s impulses through moral scruples , thus being Sutcliff’s need to attack and kill his victims and gaining satisfaction and sexual gratification in doing so while being marries to Sonia and showing concern by ‘ collecting her from work in order for her to be safe, in case she w ould be attacked by The Ripper’ (wicked beyond belief) he was never looked upon by his wife as being nothing but a normal and caring husband, he showed no guilt or remorse for his actions and following the arrest for his crimes ( all of which his wife was oblivious to) gave her an account of his actions and told her that he would ‘pretend to be mentally ill and get 10 years in a loony bin’ (wicked beyond belief). Another theory can be attachment as a cause, Bowbly (1963 and 1973) his maternal deprivation hypothesis was used to explain the harmful effects of growing up in institutions, according to Bowbly short term deprivation produces distress. Deprivation produces long-term development retardation such as affectionless psychopath. Gross ( ) Given that Peter was the first born and he was cared for by his mother throughout his early life, the suggestion that a child needs a constant primary care-giver for the first two and a half to three years of his life to become stable and able to thrive to not conditional in this instance ‘Mothers love in infancy is as important for mental health as vitamins and proteins for physical health. Bowbly (1951). One other theory of crime that can be a large deciding outcome of a conviction can be the state of one’s mind when the crime was committed, such as schizophrenia, Paranoid schizophrenia is an illness that affects the thought process of the brain, so the suffer may not be able to think logically, often there are hallucinations, which may be in the way of voices, visions, and the sensation of being touched, delusions are also common, schizophrenia can happen following an episode of stress, breakdown or disastrous life changing event (mental health volunteer notes). In the case against Sutcliff ( there was a conflict between Dr Hugo Milme, Dr Malcolm McCulloch and Dr Terrence Kay psychiatrist who diagnosed him and the Attorney General Sir Michael Havers, who believed that Sutcliff was not suffering from schizophrenia, but was telling lies). He claimed that from the age of 20 years old he had been following instructions from God, he had heard his voice, and it told him to clean th e streets of prostitutes, (Murder case book Vol 1). In order to establish the differences between a person suffering from a mental illness and a psychopath (see handout 1) are they mad or just bad. We must take on board as much information about the individual we are dealing with, which did not appear to be the case for Sutcliff. Although Sutcliff is now incarcerated in Brood moor Mental Institution, he was originally incarcerated in Parkhurst Prison, but following an attack by another inmate in March 1984 when he lost sight in one eye and needed countless stitches, his original testimony to appear mad finally became a reality. In order to conclude this discussion one must look at various events which happened to Sutcliff, of which might account for his behaviour and give an insight as to why he committed the crimes he did. As Peter was close to his mother her embarking on an affair with a policeman left him devastated, could it be that he associated this with the attack he first made in 1969 on a prostitute in Bradford following the row over money or was it the fact that the man in question was a policeman, Peter as a child was brought up as a catholic who’s views on sex might have been the cause for him to attack prostitutes, what made his family ridicule him, his relationship with his siblings could that have had an effect on him, always lonely, possible jealousy of no longer having his mother all to himself, the fact he was bullied in school could all of these given him drive and ambition and he wanted to prove something, give himself status. Why was it that although he was warned and it was repo rted by his wife Sonia that they had a normal sex life, what made him leave traces of semen on their bodies and expose them but not have intercourse with them, but not engaging in intercourse could be seen as possibly something that means procreation, he had no children of his own. No reason for this has been reported, maybe they didn’t want them or were unable to have them or was he a psychopath and given the fact that he had seen Sonia suffering with schizophrenia gave him the excuse and reasoning for his behaviour should he ever be caught. Whatever the case Peter William Sutcliff, aka The Yorkshire Ripper was indeed wicked beyond belief.

Incentives For The Future Essay -- essays research papers

Economic incentives are instruments that use financial means to motivate polluters to reduce the health and environmental risks posed by their facilities, processes, or products. These incentives provide monetary and near-monetary awards for polluting less and impose costs of various types for polluting more, thus supplying motivation for polluters to change their behavior. The report distinguishes seven basic types of incentives: Pollution charges, fees, and taxes; deposit-refund systems; trading programs; subsidies for pollution control, liability approaches; information disclosure; voluntary programs.   Ã‚  Ã‚  Ã‚  Ã‚  Economic incentives offer several advantages that make them attractive environmental management tools. First, economic incentives, in some circumstances, can be structured to achieve larger reductions in pollution than would result from traditional regulations. Second, economic incentives often can control pollution at lower costs than can traditional regulations. Third, the use of economic incentives, in contrast to that of traditional regulations, can more easily control pollution generated by a multitude of small and dispersed sources. Fourth, economic incentives can stimulate technological improvements and innovations in pollution control in situations where traditional regulatory mechanisms may not. Progressive companies are shifting rapidly from an approach of compliance to one of proactive environmental management. The revolution in thinking has gone through three stages: 1) the widespread business practice in the 1960s and 1970s of coping with environmental crises as they occurred and of attempting to control the resulting damage; 2) the reactive mode in the 1980s of struggling to comply with rapidly changing government environmental regulations and minimizing the costs of compliance; 3) the proactive environmental management strategy in the 1990s, through which corporations began to anticipate the environmental impacts of their operations, take measures to reduce waste and pollution in advance of regulation, and find positive ways of taking advantage of business opportunities through total quality environmental management.(4) For many firms, environmental values are now becoming an integral part of their corporate cultures and management processes. In a growing number of com panies, environmental impacts are being audit... ...id- to late-1980s executives in many larger corporations began to realize that waste reduction saved money. The forces described earlier began to push many firms into strategies that went beyond compliance. In the late 1980s proactive environmental management and the total- quality-management movement began to converge. TQM initiatives gave firms unexpected insights into how to make environmental management cost-effective and market-driven. By the beginning of the 1990s, waste minimization programs had been adopted by a diverse group of U.S.- based MNCs, among them Allied Signal, General Dynamics, Dow Chemical, Chevron, Boeing, AT&T, Amoco, General Electric, IBM, Polaroid, and Xerox.(15) Many successful businesses were voluntarily performing internal environmental compliance audits to identify and correct their environmental liabilities, demonstrate good-faith effort, and reduce government pressures. More importantly, the voluntary audits forced businesses to evaluate operating systems, identify the actual cost of controls, and develop environmental performance strategies to eliminate liabilities altogether.   Ã‚  Ã‚  Ã‚  Ã‚   http://environ.uiuc.edu/epareport.htm

Islam :: essays research papers

After the assigned readings and class discussions, I realized that Muslim law is very strict. Muslims must try to live according to God’s book, the Koran, and by the rules Mohammed taught them.   Ã‚  Ã‚  Ã‚  Ã‚  Every Muslim should pray five times a day: at dawn, noon, afternoon, evening, and night. He needs to pray facing Mecca. On Friday at noon, Muslims go to a Muslim temple to pray. After praying, they hear a sermon. There is no priest or minister, only a leader called the Iman. The mosque is built so that when the people pray they will face towards Mecca. Before they pray, the people must wash themselves. God is the greatest king of all, and no one should stand before Him with a dirty face.   Ã‚  Ã‚  Ã‚  Ã‚  Muslims are expected to give some of their money every year to help the poor Muslims. Once in their lifetime, if they can, every Muslim must go to the holy city in Mecca on a pilgrimage. Every Muslim who is physically and economically able to do so is required during his lifetime to make at least one pilgrimage (hajj)to the holy city.   Ã‚  Ã‚  Ã‚  Ã‚  Once a year, during the month of Ramadan, Muslims fast. For one whole month, from very early morning until the sun goes down, he does not eat or drink anything. Their fasting is very strict. They are not allowed to eat, drink, smoke, and engage in sex or violence before sunrise until after sunset for that whole month. Muslims aren’t even allowed to think about these things. I agree that this type of fasting can teach a person self -awareness and to be more sympathetic towards others who are less fortunate. Going hungry and thirsty for this amount of time allows Muslims to realize how grateful they are to have food and water.   Ã‚  Ã‚  Ã‚  Ã‚  Muslims also must never worship anything or anyone but God (Allah). Allah is the personal name of the One true God for Muslims. Nothing else can be called Allah. By having no gender or plural form, the name Allah shows its own uniqueness when compared with the word god, which can be made plural – gods, or feminine – goddesses. To a Muslim, Allah is the Almighty, Creator, Preserver, and Sustainer of the universe, and nothing is comparable to Him. In order to be a Muslim, to surrender oneself to God, it is necessary to believe in the oneness of God, in the sense of His being the only Creator, Preserver, Nourisher, etc.

Blue Whales :: Biology Ecology Nature

Blue Whales The Blue whale is the largest creature of the sea, in fact, it is the largest creature known to man. Contrary to what most people think, even though Blue whales live in the sea, they are mammals. They breathe air, have their babies born alive and can live anywhere from 30 to 70 years. The Blue whale is a baleen whale, and instead of having teeth, Blue whales have around 300-400 baleen plates in their mouths. They fall under the category of the rorquals, which are the largest of the baleen family. The scientific name of the Blue whale is, Balsenoptera musculus. Introduction Whales are separated into two groups, the baleen and the toothed whales. The blue whale is the largest baleen whale and the largest animal that ever lived on Earth, including the largest dinosaurs. Baleen are rows of coarse, bristle-like fibers used to strain plankton from the water. Baleen is made of keratin, the same material as our fingernails. They live in pods, the have two blowholes. The blue whale has a 2-14 inch (5-30cm) thick layer of blubber. Blue whales (Balaenoptera musculus) are baleen whales (Suborder Mysticeti). They are one of 76 species and are marine mammals. Background The Blue whale is called a ^rorqual^, a Norwegian word for ^furrow^ referring to the pleated grooves running from its chin to its naval. The pleated throat grooves allow the Blue whale^s throat to expand during the huge intake of water during filter feeding; they can ^hold 1,000 tons or more of food and water when fully expanded^ (Small 1971). Blue whales have 50-70 throat grooves. Blue whales grow up to about 80 feet (25m) long on average, weighing about 120 tons. The females are generally larger than the males, this is the case for all baleen whales. ^The largest specimen found was a female 94 feet (29m) long weighing more than 174 tons^ (Satchell 1998). The head of the Blue whale forms up to a quarter of the total body length. Compared with other rorquals, the head is very broad. The blue whale heart is the size of a small car and can pump almost 10 tons of blood throughout the body. They have a very small, falcate (sickle-shaped) dorsal fin that is located near the fluke, or tail. Blue whales have long, thin flippers 8 feet (2.4m) long and flukes that are 25feet (7.6m) wide. The blue whale^s skin is usually blue-gray with white-gray spots. The underbelly has brown, yellow, or gray specks. Blue Whales :: Biology Ecology Nature Blue Whales The Blue whale is the largest creature of the sea, in fact, it is the largest creature known to man. Contrary to what most people think, even though Blue whales live in the sea, they are mammals. They breathe air, have their babies born alive and can live anywhere from 30 to 70 years. The Blue whale is a baleen whale, and instead of having teeth, Blue whales have around 300-400 baleen plates in their mouths. They fall under the category of the rorquals, which are the largest of the baleen family. The scientific name of the Blue whale is, Balsenoptera musculus. Introduction Whales are separated into two groups, the baleen and the toothed whales. The blue whale is the largest baleen whale and the largest animal that ever lived on Earth, including the largest dinosaurs. Baleen are rows of coarse, bristle-like fibers used to strain plankton from the water. Baleen is made of keratin, the same material as our fingernails. They live in pods, the have two blowholes. The blue whale has a 2-14 inch (5-30cm) thick layer of blubber. Blue whales (Balaenoptera musculus) are baleen whales (Suborder Mysticeti). They are one of 76 species and are marine mammals. Background The Blue whale is called a ^rorqual^, a Norwegian word for ^furrow^ referring to the pleated grooves running from its chin to its naval. The pleated throat grooves allow the Blue whale^s throat to expand during the huge intake of water during filter feeding; they can ^hold 1,000 tons or more of food and water when fully expanded^ (Small 1971). Blue whales have 50-70 throat grooves. Blue whales grow up to about 80 feet (25m) long on average, weighing about 120 tons. The females are generally larger than the males, this is the case for all baleen whales. ^The largest specimen found was a female 94 feet (29m) long weighing more than 174 tons^ (Satchell 1998). The head of the Blue whale forms up to a quarter of the total body length. Compared with other rorquals, the head is very broad. The blue whale heart is the size of a small car and can pump almost 10 tons of blood throughout the body. They have a very small, falcate (sickle-shaped) dorsal fin that is located near the fluke, or tail. Blue whales have long, thin flippers 8 feet (2.4m) long and flukes that are 25feet (7.6m) wide. The blue whale^s skin is usually blue-gray with white-gray spots. The underbelly has brown, yellow, or gray specks.

Environmental Studies Essay

The population of the world has been on an upward trend for the most part of the past many years. The rapid rise in the population in the past had been attributed to factors like improved medical care and good nutrition. However, the statistics appear to be changing as the 21st century wears on. There has been recorded a decrease in the overall global population growth rate such that although there is still a growth in the population, the rate is reducing. However, the rate is not evenly distributed. Instead, only the developed nations where industrialization and modernity are advanced are experiencing the population slowdown. The developing World still has rising rates of population growth (I. R. C. , 2005). The reduction in the growth rate can be attributed to climatic changes that have in turn caused people to resort to totally new ways of living. There has been a lot of destruction to the atmosphere and the resultant effect has been that some of the plants and animals that were useful for improving the immunity of the people when included in the diet are now extinct. Global warming has killed many such plant and animal species; and the other effects have been that there is an increase in strange, previously uncommon diseases caused by climatic changes which are making more people to die faster than before. Life expectancy has also reduced because of these changes (Johansen, 2009). In addition, the lifestyles of people have changed drastically, including having diets that are less healthy such as the consumption of genetically modified substances whose chemical contents are harmful to the body and shorten life. This trend is bound to go on for as long as industrial development is going to continue, worsening as the effects of global warming resulting from industrial pollution increase (Vormedal, 2005). New factors are bound to come into play, including increased child mortality and increased resistance to medication available even as new species of pathogens and parasites emerge with changing environmental conditions. It is also expected that more people will be less willing to have children as the pressure on available resources increases, thereby pushing the population growth rate down. With globalization opening up doors of nations, more technologies and immigrants are expected to get in, and not only will there be a real pressure on resources available pushing families to downsize but there will also be a massive movement away from the use of natural, more nutritious food items to those that are artificial and developed through technology (I. R. C. , 2005). As such are likely to be more harmful to the body, many people will find themselves less fertile while the fertile ones will be less willing to have more than a few children. The few children born will have a reduced life expectancy due to increased diseases; and child mortality will be very high. As the figure below shows, the population of Canada has been on a downward trend ever since the start of this century. It is expected that this will go on as the country becomes more industrialized and as global warming becomes more pronounced. By the year 2030, the country will most likely be faced with the problem of having a majority of its population being people over the age of 65 years because the young people are those who are likely to be affected negatively by the forces causing this trend (I. R. C. , 2005).